Air Cleaner Identification

I am trying to make my '66 98% stock and ne of the things I would like to leaver is the air cleaner. Does anyone happen to know if this is an orginal air cleaner for a '66 w/ Dauntless V6? I am trying to see if I can come up with all original decals if possible. With two "AC" logos on the frnt of the cleaner, I am thinking it is an AC Delco.
Thanks,
:v6:
BenF
View attachment 25034
View attachment 25035

 

looks like the correct one

 

Is it the decal here?

http://www.bearcreeksurvey.com/ForumOnly.htm

 

I cannot find the correct decals anywhere. As I recall, the cleaner has 2 decals a large in front and a small on the side. If I can verify it is correct but cannot locate decals, I will see if beercreeksurvey can design one for me.
Thanks,
:v6:
BenF

 

Thats the air cleaner I have on my '69

 

Doh. Ma bad. I got those around here sum where's, too. Lemmee look.

 

I'll be able to get a closer shot of the sticker this weekend.
Here it is. The top line says FRONT
http://www.earlycj5.com/forums/attachment.php?attachmentid=24353&d=1225936183

This is my unrestored 66 (Nov65 build) with 31k miles. Note the factory painted bypass hose. If you are interested in pictures of other "original" details like the white fan and crank pully or early dual-pipe fuelline routing let me know.
Tom

 

My 66 oil bath has indication that there were two decals on it. One at front and another beside it. Would that possibly be for timing and point setting? Havnt seen any of these decals anywhere? Tnx Walt

 

I would love to find the correct decals for this air cleaner as well. Anyone???

 

Thanks for the input. If you could post pics of "odd" details that would be great. I'll take all of the info I can get.
Thanks,

 

This is on my 66 oil bath.
Let me know if you need the pix in higher resolution.

 

White fan and pully

Ben,

Details I mentioned

 

Re: White fan and pully

Thanks for the pics Tom!
:v6:
BenF

 

Re: White fan and pully

X2 Good Show. Any indication of a second decal having been on your breather housing?

 

I don't see any marks or remains of a breather sticker.

Ben, I was just looking at the stripped front end pix you posted. Do you have the heat shield that holds the fuel filter and blocks manifold heat? Its sheetmetal and I can shoot a picture of it also.

The dual pipe fuel system on mine has both lines running along the right side of the oil pan and crossing to the frame just in front of the steering gearbox. Rubber lines make the transition to the hardline on the frame that starts immediately behind the steering gear. The return line comes up through the floor near the fuel filler and attaches to a 90degree fitting on the top of the tank,

As far as color details go, my oil filler cap is black.

Tom

 

Tom, if you have pix of the heat shield and dual fule pipe system tha would be great.

Thanks,
:v6:
BenF

 

Ben
Scroll down to my posting in this posting and you can see where I posted a picture a while back.

http://www.earlycj5.com/forums/showthread.php?t=62009

 

Thats it!
Mike, are those pictures of your 71? The fuel lines are different than in my 66. It looks like yours are what is spelled out in the FSM. There was a change sometime during the 66-71 period when the supply and return went from being under the engine to going over the top.

Your project looks great.

Tom