1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

FinoCJ's Recent Activity

  1. FinoCJ replied to the thread Fino's 1970 Mini Build Thread.

    don't worry - they already leak as is...:beer: the sad part is, literally there is nothing that doesn't leak on this old junk and I've...

    Mar 20, 2019 at 10:13 AM
  2. FinoCJ replied to the thread Fino's 1970 Mini Build Thread.

    FWIW, After closer inspection today...I did find the small slots in the Trac-lok housing that allow for a jaw style puller... [IMG] [IMG]

    Mar 20, 2019 at 12:20 AM
  3. FinoCJ replied to the thread Fino's 1970 Mini Build Thread.

    Going to have to study pinon work a bit more...I have spend most of my time dealing with the case and carrier bearings, backlash etc....

    Mar 19, 2019 at 10:42 PM
  4. FinoCJ liked TIm E's post in the thread Fino's 1970 Mini Build Thread.

    No sir. The pinion depth on that 44 is set by shims under the inner cup. The new inner pinion bearing is pressed directly on the pinion...

    Mar 19, 2019 at 10:28 PM
  5. FinoCJ replied to the thread Fino's 1970 Mini Build Thread.

    starting to feel this way as well...are you using set up bearings for the pinon as well?

    Mar 19, 2019 at 9:56 PM
  6. FinoCJ replied to the thread Ih Travelall 4x4.

    [MEDIA]

    Mar 19, 2019 at 5:57 PM
  7. FinoCJ replied to the thread Fino's 1970 Mini Build Thread.

    More thinking aloud...I have been very hesitant to pull the pinon - In theory I don't have to to pull the pinon, but as I am going to...

    Mar 19, 2019 at 5:04 PM
  8. FinoCJ liked colojeepguy's post in the thread 10 Inch Rear Brakes Question.

    [ATTACH] This is a CJ 10" brake. They're easy to identify by the rod actuated self adjuters, most vehicles use a cable for this.

    20190319_140506-1.jpg Mar 19, 2019 at 4:50 PM
  9. FinoCJ liked Warloch's post in the thread Fino's 1970 Mini Build Thread.

    Your not gonna like my answer - I used a press and adapter to pull them. It might be worth checking some shops and see if they would...

    Mar 19, 2019 at 4:45 PM
  10. FinoCJ liked TIm E's post in the thread Fino's 1970 Mini Build Thread.

    You can usually get them with a bearing separator/puller as you mentioned, but clamping it in there good enough to hang on to the inner...

    Mar 19, 2019 at 4:45 PM
  11. FinoCJ replied to the thread Fino's 1970 Mini Build Thread.

    I have done this before for other things as well...and was thinking this would be the best option this time around. I think I paid $20...

    Mar 19, 2019 at 4:45 PM
  12. FinoCJ replied to the thread Fino's 1970 Mini Build Thread.

    really trying not to damage the shims...in any case, I need to get the existing carrier bearings off so I can see what amount of shims...

    Mar 19, 2019 at 3:29 PM
  13. FinoCJ replied to the thread Fino's 1970 Mini Build Thread.

    Speed bump...the broken tab on the reluctor ring is needed to keep the amount of ring rotation to 1/2 turn (or something like that) and...

    Mar 19, 2019 at 12:39 PM
  14. FinoCJ replied to the thread Dauntless Flooded.

    Guess I was thinking more along the lines that fuel was coming out of the exhaust, it wouldn't idle well, and stumbling upon wide open...

    Mar 19, 2019 at 9:22 AM
  15. FinoCJ liked colojeepguy's post in the thread Dauntless Flooded.

    That would make it run very rich but it shouldn't cause flooding.

    Mar 19, 2019 at 9:16 AM
New Posts