-
Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.Dismiss Notice
FinoCJ's Recent Activity
-
FinoCJ replied to the thread 225 Head Replacements... 231??.
Not exactly close, but maybe time for a road trip? http://www.earlycj5.com/xf_cj5/index.php?threads/152150/
May 15, 2022 at 9:02 PM -
FinoCJ replied to the thread Limited Slip Recommendations?.
if both wheels on an axle start spinning, then the vehicle has a tendency to slide sideways (or whichever way is downhill or momentum is...
May 15, 2022 at 7:31 PM -
FinoCJ liked Brislin06's post in the thread Duantless Running Lean.
Fino cj you have a good point it could be leaning itself back out at idle. I took a carriage bolt cut it of and filed the square part...
May 15, 2022 at 2:59 PM -
FinoCJ liked Brislin06's post in the thread Duantless Running Lean.
So I took fino cj’s advice I sprayed around the intake and carb base with carb choke cleaner to look for vacuum leaks. I didn’t find...
May 15, 2022 at 2:40 PM
-
FinoCJ replied to the thread Duantless Running Lean.
How loose or sloppy is the butterfly shaft in that hole? It's been awhile since I messed with my 2g, but I was working on my qjet more...
May 15, 2022 at 12:46 PM -
FinoCJ liked ITLKSEZ's post in the thread Varg In Jeep's Clothing.
Carrier is 90# Saw is 15# Spare is 62# So 167# total. It doesn’t sound like much, but it just crests that tipping point of torque...
May 15, 2022 at 12:31 PM -
FinoCJ liked Alan28's post in the thread Bye Bye My Cj5 2011-2022.
I'll soon post a pilgrimage at my high school, which is one of the 2 for our top people... That was not my choice, probably luck; same...
May 15, 2022 at 7:40 AM -
FinoCJ replied to the thread Rear Gas Tank.
I used the intermediate passenger rear panel filler location as a model for mine - just above the passenger rear tail light....its on...
May 14, 2022 at 4:47 PM -
FinoCJ replied to the thread Duantless Running Lean.
JMO, but before going to larger jets, I'd look for a root cause first as my first thoughts are that its not simply a jetting...
May 14, 2022 at 1:29 PM -
FinoCJ replied to the thread Duantless Running Lean.
those are heat range 3...the coding is R - resistor plug 4 - 14mm thread 3 - heat range FWIW its worth, I found the R43 to be too...
May 14, 2022 at 1:12 PM -
FinoCJ liked Brislin06's post in the thread Duantless Running Lean.
I apologize I have to change the post I meant to say lean
May 14, 2022 at 12:53 PM