The KaiserWillys.com website states that the rims are 5 3/4". But it also states that tubes should be used. Any opinions on that? Can I mount a...
I've ordered a set of the 16" repops from KaiserWillys.com for my 66 CJ5 that is "almost" stock. It has a 2 1/2" lift underneath it. Original...
Can I mount 235/85r16's on a 16x6 re-pop from kaiserwillys.com ? Let me know what y'all think. Thanks,,,
KaiserWillys.com has new 16" steel wheels advertised, but they're OmixAda. I have heard to stay away from that manufacturer. It's the only place I...
greg74, thats a good looking jeep. Thanks for the pic. I think the 2 1/2" lift will be adequate to fit the 7.50's. PeteL, I say "restoration"...
I'm about 80% complete on a frame off restoration of my 66 CJ5. I have a 2 1/2" suspension lift on her right now. My question is this: I'm going...
Just ordered a set of 16" Steel Civilian Rims from KaiserWillys. I know that all of the original tires that were mounted on these rims required...
nickmil, you were right!!! I have the spacer behind the bearing versus in front of it. On FSM page 245, the spacer is numbered 33. So now the...
By spacer, do you mean the washer behind the nut? If so, yes its there. Just odd. Everything appears to turn freely in all gears until I "firmly"...
OK,so today I was mating up my stock DANA 18 transfer case to the stock T86AA. After "tightening" the rear transmission input nut,,,,,,, it all...
Separate names with a comma.