I have a 7 blade aluminum blade cooling fan not stock. My clutch fan has play and makes noise. I was looking into a 2797 haden severe duty clutch...
that is the picture I needed thank you
I bought the only release cable sold. I think for a 76 others said its too long but just need to loop it. I can build the bracket did it mount on...
[ATTACH] I bought a new release cable for 76 cj5 I know it is different but I think I am missing the mounting bracket for the TEE handle 8.180-13...
my 74 did the same. then started working again but speed is still off. I left it alone after searching for gears not found.
same happened to me I just cut a section of the old seal and filled the gap with that. its like you wont know the final size so I would say cut it...
ordered the cable will let you guys know how the 1972 cable works
Crown Automotive Parking Brake Release Cable - J5350541 is this the proper cable to fit my 74 cj5? HERE IS A SCREEN SHOT OF THE CABLE [ATTACH]
I bought the willys temp gauge cheap it works good but had to add a adaptor and had to install a small led light inside the gauge. saved a few...
THE proper carb is a 108 right now i have a holley 650 vac secondary and de tuning it to work with 74 304 v8 it has a cam in it long tube headers...
Due to the new gas with the boiling point lower now, how many of you guys added a fuel return line to your 74 cj5 304. During the intake upgrade...
transition ports on carb check into that. the amount of port exposed by the butterflys. on holley it can be adjusted on the 4 barrel side by the...
Separate names with a comma.