Finally got a spare minute to give an update. When I bought my rebuild kit from Mike's, the accelerator pump in the kit was just slightly shorter...
Got it fixed! In a hurry now but I'll update you on the fix later. Thanks everyone!!!
I keep trying to focus on what could have changed when I did the seafoam treatment through the pcv and then running it hard. It ran almost perfect...
I removed and soaked it in cleaner during the rebuild. Is there a test procedure for it? I just made sure the pin moved.
Thank you for the help. I did adjust idle mixture but it didn't help. I tried every setting from 1 turn out to 4 turns out and it doesn't make a...
It is working... see #2 above.
I have a 67 that I bought about a year ago with a 225 V6 and 2G carb that is bogging down when I give it much gas. It will die if I keep the...
I did notice that and plugged the manifold side until I get the vacuum line on but that still wouldn't explain why it will only idle with high...
Sorry for the lack of info. I just bought it and was told everything is original. I've been driving it but of course it is low on power and misses...
my 67 sputters and backfires so I suspected a timing issue. When I tried to set the timing to 5 degrees it would stall out. It only has a decent...
Separate names with a comma.