do you have a pic of the manifold only?
the 435 is going to be used behind a 2.5 and the 465 is going behind a 4.3, as for finding parts i use pull a part most of the time but these...
if there is enough metal to tap i would go that route if not then try another helicoil :beer:
i got a NP435 and a SM 465 today for 150.00, tore both of them down and all in good shape pics coming soon
hey Steve my 66 has the same setup , spin on oil filter :beer:
good find and enjoy it :beer:
look for the tag :beer:
hey to all Gone fishin is down for awhile T-90/D-18 total rebuild, plus clutch.PP.T/O bearing Questions is about i have seen in some pics of a...
i added a blk wire tie today ,thanks for the info :beer:
on my 66 it runs from the valve cover thru a pcv valve attached to the intake side of the head:beer:
the oil filter mount was already installed and it does appear to be a factory option ,and for the air tube it is schedule 80 blk cpvc, i am going...
here is how i built my air cleaner system, the PO had left the oil bath off and ran a taped on filter media
Separate names with a comma.
