Interesting, thanks for that, I'll give it a try.
Hello all, Just putting back together my Dana 41 and on one side after install the tapered shaft and the race, it sits pretty flush with the...
Ya, I am getting new leafs all around and shackles, bushings. I was just told the 32207's I got for the CJ2A aren't not the same all around that...
You mean Rob Mills from ORA? I saw that because I am ROb (or Bobby) from OJC :) ORA does do runs in Rigaud though.
Well, I usually take a run to Ogdensburg to pick up the stuff I buy from the US so I don't get custom fees or anything. Maybe I will give them a...
So what "should" a CJ2A have for springs? the A612 and a614 leafs? I am just going to buy new leafs, bushings and shackles. (once I figure out...
Here are some pics. This is the eye of the rear leaf http://www.ottawajeepclub.ca/photos/gallery/main.php?g2_itemId=20942&g2_navId=x9fe16542...
Ok, so my saga continues as to figuring out what the PO did before I have this so called CJ2a. I am onto my rear axle which is a Dana 41 and...
I am a bit stuck here, I am tring to hook the lines to the MC, but the holes on the MC are not the 3/8 (3/16 OD Tube) they seems to be 1/2 (5/16...
Thanks! I went to an actualy Auto Parts store (like NAPA or AutoZone) and the had the T fitting, I think I got the right one for the brake...
So I am a bit puzzled where I can find a T fitting for the brakes. I now have the hoses that attach to the frame. I couldn't find anything at...
Thanks, the fact that the front comes on first wouldn't have clicked, good info.
When I did mine the only problem I have run into so far was the push rod, it was WAY to long. To I ended up making a new one from a 7/16 bolt UNF...
Separate names with a comma.
