Thanks for the input. I was afraid that was going to be the case. I thought I'd ask anyway.
I have a question for you guys. I have converted from a D25 to a D30 front axle. My D44 in the rear has 4.27 gears and the D30 up front has 3.54...
The Durabak instructions say that the smooth version of the product can be sprayed. I didn't want to mask off the entire body so I used a brush...
I just wanted to show off my newly Durabaked tub. I needed to coat the interior of the tub with something to help prevent any rusting since my...
Well I did some surfing and figured it out. The caster is the angle towards the rear of the vehicle and the shims go under the axle and between...
OH MY, WHAT A NIGHTMARE!! I just drove the Jeep to work and back (~30 miles). I could not believe how bad the handling was. I had only driven...
I appreciate all the input from you guys. I ended up swapping in the Dana 30 front axle with the disk brakes. I would have preferred the 11" drums...
I have a '63 CJ with stock engine (F134), tranny, t-case, and axles (D-27 front, D-44 rear with 4.27 gears). Everything is in good working order....
The saga continues for my F-134!!! I replaced the plugs with Champion J8C's today and #2 and #3 will not fire. I also got new plug wires. I...
Thanks for all the replies. I'll check the resistance in the AM. I'm hoping that it was just a defective plug. What kind of luck must I have that...
I have attached a picture of the plug. I had already removed the melted part from the tip, sorry. The Jeep is 12 volt from front to back. The...
I have a '63 F-head in my CJ-5. I have just gotten the beast on the road after a year-long rebuild. I have posted before that the #4 cylinder is...
Separate names with a comma.
