hello all ,, the only things im missing for "jeep from parts" project is a flat fender body and a steering column set up for saginaw ,,,,if your...
id start with the valves ,,i have a hour meeter on my 3b and right about 150 hours i re adjust them ,,,sometimes i dont think i need to ,,but...
if theres ice dont i repeat dont engage the lockers ,,,you go sidways as much as forward
do you have an electric fan?
flex it out measure short and long distance ,,,then just go to the store and getem
the six had BDS springs before we started this project and it was the softest tiding cj i have ever been in the down side was that the wheel...
nothings worse than a missing or busted nut
im doing the same conversion , you do need the adapter for the tcase which will lengthen your driveline ,, but the good news is if your willing...
i like how you used a bottom hoop and a top one instead of just a front one with a dash bar,,,that i will certainly do to mine if you dont mind me...
OOOHHH CRAP , I think i just wet myself!!!!!!!!! Wow that looks good ,, about to build mine but certainly wont show the pics now ,, it would be...
id be interestd to know as well , because im taking mine off, replacing with a warn 8 . It works great but it its just so heavy
when you bench bled the MC did you notice if it was pulling fluid back ? that could be a simple test
its worked for over a year,, and never leaked ,, although when i pull the cap off i always put one hand on the tube to hold it down ,,,but my cap...
i cleaned mine off and used red (high temp) rtv hasnt leaked or given me trouble since
Separate names with a comma.
