Trickpatrick, I really like your roll cage. It's the first cage for a long jeep I've seen that I like. I would like to try something like yours on...
I suspect the problem with the wheels might be the shackles. Most likely the shackles have canceled the positive caster and caster is what makes...
Actually it is the opposite, if you were to remove the front sway bar and add it to the rear, you would have a vehicle that would be very loose...
The flexplate I ordered from Rockauto arrived and it fits, all the holes line up with the holes on the 231's crank. I counted the teeth and there...
Here's the Motobuggy with the full dirt wheels and shocks. [IMG]
We are building these rigs for racing and/or pleasure. They will use a Honda TRX 700 XX quad motor and suspension. [IMG] [IMG] [IMG] The top...
The part # was 16913.08. I ordered for a 71 jeep commando 3.7 L (225 cid) thinking it would be close to what I have. Now that I have actually...
Thanks all for the help. My block casting number is 1249432, which translates to a 1975-1976 block and it is an odd fire. So now I need to look up...
I've taken some pictures of my flexplate and the crankshaft end. The crankshaft end pictures are not very good, but hopefully someone can tell...
Both flexplate to not align with all the holes in the crankshaft end. I'm wondering if maybe my motor is not what I was told. Is it possible it is...
Well, the flexplate I ordered from Rock Auto came today and it is the same as the one I had, 168 teeth.
More news today about my build, the transfercase adaptor from Advanced Adaptors arrived today. Looks like everything I ordered came in except for...
Tonight I installed the YJ's master brake cylinder with the power boost and hanging brake pedal. The master cylinder was never disconnected from...
Just a little update, I ordered an adaptor for the transmission/transfercase from Advanced Adaptors yesterday. I also ordered the engine mounts...
I suggest you perform a compression test. If you tried to start this motor on bad gas (I know from experience), it is possible you might have some...
Separate names with a comma.