1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

1967-69 cj-5

Discussion in 'Early CJ5 and CJ6 Tech' started by jeep_teck, Dec 29, 2009.

  1. jeep_teck

    jeep_teck New Member

    I have three cj-5/s 2-1967and 1 -1968
    they all have the full hood with no cutout on the passengers side.
    According to the pics I have they should all have the cutout.
    My only reference(and I do not know why but most pics are from the drivers side) Are the tuxedo park pics..
    Would the vehicle shop manual be a good start for body parts//?
     
    jeep_teck, Dec 29, 2009
    #1
  2. Patrick

    Patrick Super Moderator Staff Member

    snorkel cutout ended after '64 I believe.
     
    Patrick, Dec 29, 2009
    #2
  3. sparky

    sparky Sandgroper Staff Member Founder

    See tech library for written description of years and changes.
     
    sparky, Dec 29, 2009
    #3
  4. John Worman

    John Worman from New Mexico

    I have a 67 (probably a late 66) and it came with no cutout on the hood. I managed to smash it up a little in 69 and bought a new hood from the Jeep dealer. It did have the cutout. Mine was a Tuxedo, but there aren't many of the Tuxedo goodies left.

    John
     
    John Worman, Dec 29, 2009
    #4
  5. Patrick

    Patrick Super Moderator Staff Member

    Patrick, Dec 29, 2009
    #5
  6. USMC_LB

    USMC_LB Member

    My '67 CJ6 does not have the cut-out.

    TD
     
    USMC_LB, Dec 29, 2009
    #6
  7. jeep_teck

    jeep_teck New Member

    hey guys great info
    I did not know that there were older files
    after the web site face lift .

    There must be 1 weeks reading
    in there\


    thankx

    mark.
     
    jeep_teck, Dec 29, 2009
    #7
  8. bkd

    bkd Moderator Supreme Staff Member 2022 Sponsor

    OK not to rock the boat but my 1966 cj6 came stock with the cut out.....I'm positive it was stock
     
    bkd, Dec 29, 2009
    #8
  9. blazer

    blazer Member

    my 1966 cj6-a didnt
     
    blazer, Dec 30, 2009
    #9
  10. Glenn

    Glenn Kinda grumpy old man Staff Member

    That's interesting that the replacement hood had the cutout. Obviously had been in stock for a while.
     
    Glenn, Dec 30, 2009
    #10
  11. kaiser_willys

    kaiser_willys Well-Known Member

    may have been cheeper to stock one hood that would fit either application:)
     
    kaiser_willys, Dec 30, 2009
    #11
  12. SmokinIdahoan

    SmokinIdahoan Avian Flu Controller

    My 1969 CJ5 doesnt have the cut out, but there is a bracket shaped like the cutout on the inside of the hood
     
    SmokinIdahoan, Dec 30, 2009
    #12
  13. Walt Couch

    Walt Couch sidehill Cordele, Ga. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    My 66 Tux has the cut-out and I believe it to be original.
     
    Walt Couch, Dec 30, 2009
    #13
  14. ojgrsoi

    ojgrsoi Retired 2024 Sponsor 2023 Sponsor 2022 Sponsor

    ojgrsoi, Dec 31, 2009
    #14
  15. nickmil

    nickmil In mothballs.

    That's what they are referring to. My '67 parts Jeep, '68, and the Daughter's
    '70 do not have the cutout.
    I'd have to look at the all original '57 to see which is in storage.
     
    nickmil, Dec 31, 2009
    #15
  16. ojgrsoi

    ojgrsoi Retired 2024 Sponsor 2023 Sponsor 2022 Sponsor

    I moved the Jeep outside in the sun and see that the hood must be a replacement. The green on the hood is close to the green on the body but not the same. Sorry for the incorrect information.
     
    ojgrsoi, Jan 3, 2010
    #16