1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

What year did they start putting turn signals on?

Discussion in 'Early Jeep Restoration and Research' started by dfaltus, Aug 16, 2013.

  1. Aug 16, 2013
    dfaltus

    dfaltus New Member

    Joined:
    Aug 14, 2013
    Messages:
    4
    I have a 62 (150739) that does not have a turn signal switch on the column. I know the inspection station is going to give me hell because vehicles made after 60 in TX have to have turn signals. Would this CJ5 have had signals?
     
    dfaltus, Aug 16, 2013
    #1
  2. Aug 16, 2013
    rusty

    rusty Well-Known Member

    norfolk,va
    Joined:
    Dec 16, 2006
    Messages:
    1,652
    In 1962, I would think it should have them.
     
    rusty, Aug 16, 2013
    #2
  3. Aug 16, 2013
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,124
    '62 parts manual lists them as optional equipment.

    H.
     
    Howard Eisenhauer, Aug 16, 2013
    #3
  4. Aug 16, 2013
    Stout

    Stout Member

    Quakertown, PA
    Joined:
    Nov 1, 2010
    Messages:
    958
    My '59 has them and I'm confident it's original. May have been a factory option but I know the original harness was wired for them.
     
    Stout, Aug 16, 2013
    #4
  5. Aug 16, 2013
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    My '57 has them but the '59 had them added fwiw.


    Sent from my iPhone
     
    nickmil, Aug 16, 2013
    #5
  6. Aug 17, 2013
    dfaltus

    dfaltus New Member

    Joined:
    Aug 14, 2013
    Messages:
    4
    This one has a terminal block on the driver side fender apron that has 3 terminals. One for High Beam, one for Low Beam and one for parking light. Parking lights have 2 wires exiting the sockets but the Blue ones do not have a connector. Would the factory option have added an additional terminal strip for left and right or replaced the terminal strip with one having 5 terminals? Also would they have replaced the wiring harness or just added the 2 wires and taped them in place? Trying to make it safe but looking original.
     
    dfaltus, Aug 17, 2013
    #6
  7. Aug 17, 2013
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,124
    There's no terminal strip for the torn signals, the wires go direct to the sockets. Here's the section from the '62 parts manual- looks like new wiring , connectors & lamps were supplied.

    [​IMG]

    [​IMG]

    [​IMG]


    H.
     
    Last edited: Aug 25, 2013
    Howard Eisenhauer, Aug 17, 2013
    #7
  8. Aug 17, 2013
    dfaltus

    dfaltus New Member

    Joined:
    Aug 14, 2013
    Messages:
    4
    Thank you very much! I think I can make it look original if I can find the switch. Just ordered Mechanics (service) Manual
    Fits 46-65 CJ-2A, 3A, 3B, 5 from Kaiser Willys. Is that what you used for the information? By the way did the air filter pictures help?
     
    dfaltus, Aug 17, 2013
    #8
  9. Aug 17, 2013
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,124
    The parts list is out of the 1962 parts manual- I believe reprints are available from the same outfit that prints the FSM. The wiring diagram is out of a FSM- the wiring on these things didn't change much from '55 to '71. The original equipment Spartan switches show up here & on Ebay from time to time in various states of repair, I myself use a nice gen-u-ine chromium plated Signalstat 900 (now made by "Truck Light" I believe).

    Yup, the filter pic is just what I was looking for, Thanks :).

    H.
     
    Howard Eisenhauer, Aug 17, 2013
    #9
  10. Aug 30, 2013
    Bob-The-CJ

    Bob-The-CJ Member

    Italy, Texas
    Joined:
    Nov 6, 2012
    Messages:
    386
    Just wanted to add my Jeep is a 1963 Texas Jeep and it did not come with the turn signal switch on the column either. Mine also has the same wiring you mention Dfaltus. Like Howard I added a Signalist 900 and everything works fine. It was easy to hook up also.

    Forgot to mention - the state inspector did not even mention that it did not have the turn signal switch. You will find they check very little on a Jeep his old
     
    Bob-The-CJ, Aug 30, 2013
    #10
  11. Aug 30, 2013
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,124
    Found this the other day, wiring diagram out of the owner's manual showing wiring with or without turn signals-

    [​IMG]

    H.
     
    Howard Eisenhauer, Aug 30, 2013
    #11
New Posts