1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Two Quick Questions

Discussion in 'Flat Fender Tech' started by Canadian 62, Oct 9, 2013.

  1. Oct 9, 2013
    Canadian 62

    Canadian 62 Member

    Kelowna BC
    Joined:
    Jul 6, 2006
    Messages:
    61
    Just purchased a 1947 CJ2a and wonder what the two bolts are that come through the lower panel of the windshield. Looks like it would make a great place to attach a gun case. Also I have a round plate over the drivers side tail light? Notice that these are found on others as well.
     
  2. Oct 10, 2013
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    Can you post a pic? Sounds like a vestige of the WW2 Jeeps. I suspect the plate on the rear would be where the trailer connector would go. Hopefully someone with more knowledge will chime in.


    Sent from my iPhone
     
  3. Oct 10, 2013
    duffer

    duffer Rodent Power

    Bozeman, MT
    Joined:
    Sep 17, 2009
    Messages:
    4,498
    I believe those were to hold clips for the top bows. Do a search on the 2A Page. Has to be a detailed description there.
    http://www.thecj2apage.com/

    As for the rear plate, that is likely a cover for the trailer plug present in the pre-2A militaries. Willys didn't change too much from the MB when they started building the 2A. The only big items were the steering set up, rear axle and transmission. Tub/body was pretty much unchanged except for the grill and the addition of a tailgate.
     
  4. Oct 14, 2013
    johnnybravo

    johnnybravo New Member

    Bugger Hole
    Joined:
    Aug 14, 2010
    Messages:
    10
    The bolts are for the clamps to hold part of the top bows. Ditto on checking the CJ2A page and look through the photos.
     
  5. Oct 18, 2013
    Canadian 62

    Canadian 62 Member

    Kelowna BC
    Joined:
    Jul 6, 2006
    Messages:
    61
New Posts