Remote brake fluid reservoir

I'm thinking about adding a remote reservoir for my stock master cylinder. It looks very straightforward and my M/C cap already has a opening tapped into it so it should literally be bolt on and go.

After reading here and a few other places, the following parts have been suggested for the reservoir:

clutch reservoir off of a GM. S-10 or early 90's Firebirds

clutch master cylinder on a '79-'85 Mazda RX7

clutch reservoir from a mid 80's Ford Ranger truck

Does anyone here have any specific comments or experience with any of those? and

Can anyone recommend any other possibilities?

Thanks

 

Thanks for the kit suggestions but this isn't high on my priority list so I'm not interested in using a kit. I figured pick 'n pull prices will be more better. Older vehicles in the local yards are fewer and fewer as time goes by so I'm really just looking to be able to identify as many donor possibilities as I can.

 

FWIW, I have a remote reservoir that ultimately came from Herm, and it's used, filthy, dirty, and sun damaged....I haven't installed it.

 

I just double checked...Herm's remote reservoir is out of stock.

 

I looked further on the Willwood site and they have a kit for $20.93. I might check into that further.

 

Duffer, you're right. When I first looked at the Willwood sight I say the $60 & $70 kits but now I see the $20 one that looks like it will work for my purposes.