1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Jeep Identification

Discussion in 'Early Jeep Restoration and Research' started by Mark E, Dec 5, 2005.

  1. Apr 9, 2006
    gscj5

    gscj5 H2 Recovery Team

    Kettering, Ohio
    Joined:
    Sep 22, 2002
    Messages:
    339
    Hey Glenn I am curious how can you tel the differance between the 25 and the 27 from that pic?
     
  2. Apr 11, 2006
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,377
    I couldn't from the pics. I went by the fact he stated it was a 25. ;) :hurrican:
     
  3. Apr 16, 2006
    GIjivecrew

    GIjivecrew GI Jive

    Somerset, United...
    Joined:
    Feb 8, 2005
    Messages:
    41
    Its a CJ7 hence the straight back panels.
     
  4. Apr 16, 2006
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,377
    :?
     
  5. May 21, 2006
    Mark E

    Mark E New Member

    Joined:
    Nov 6, 2005
    Messages:
    35
    Hi All again

    Now that we are pretty sure my jeep is either an M606A1 (export) or a CJ5 (export) for military, I have been looking at these Painless Wiring Kits that everyone keeps talking about they sound good so I might try one IF anyone can tell me which one I need and how much they cost bearing in mind I am not to sure of the year of my jeep (see previous threads) and I am over here in good ol blighty, any help on this one be much appreciated.
     
  6. May 22, 2006
    dwoodelectric

    dwoodelectric New Member

    Newton, Texas
    Joined:
    Apr 21, 2006
    Messages:
    3
    I am curious about this one too! My jeep is identical, with the exception of a large fuel tank filler opening. The brass plate lists a delivery date of Feb. 1950, and lists it as an M38A1, but according to the literature I have, it does not correspond. The title is listed as 1951. It is still 24 volt, and the battery box clips on between the hood and windshield on the pass. side. The windshield is split, rather than one large piece, and the fenders wrap around the front, rather than flat. I know everything is original, but cannot put a specific name to it, although it is listed as a M38A1. It has a welded tailgate, and one piece front, any help?:flag: :beer: :?
     
  7. May 23, 2006
    Mark E

    Mark E New Member

    Joined:
    Nov 6, 2005
    Messages:
    35
    Have you got any pictures to post so the 2 can be compared
     
  8. Apr 11, 2016
    GeorgeL

    GeorgeL Member

    Washington U.K.
    Joined:
    Feb 26, 2016
    Messages:
    84
    I get confused by the variations of swiss jeeps. Some have one piece screens, others have split screens.
    Some have a mesh panel over the grill, some don't.
    Some have the petrol/gas cap behind the seat and the 1970 models have them at the rear.
    As stated here, some armies used civilian models converted to 24 volt with minimum military spec.
    I dont think mine is a M606 but a militarised CJ5.
    Does the civilian CJ5 have the spade bracket under the body?
    Does the civvy version have the document/map canvas pouch attached to the rear of the passenger seat?
    Ive talked to two other swiss jeep owners and their jeeps seem different to their own.
    I cannot find any clear clear information about these jeeps.
    Does anyone know more?
     
  9. Apr 11, 2016
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    I would suggest starting a new thread on this since the last post, right before yours, is from 2006 ;)
    Good use of the search function though!
     
  10. Apr 13, 2016
    GeorgeL

    GeorgeL Member

    Washington U.K.
    Joined:
    Feb 26, 2016
    Messages:
    84
    Check out new response from Ulrico in my thread Swiss jeep variants
     
New Posts