1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Frame strapping

Discussion in 'Builds and Fabricators Forum' started by Project71-5, Apr 22, 2005.

  1. Apr 22, 2005
    Project71-5

    Project71-5 BACON

    Gypsum, CO
    Joined:
    Sep 24, 2002
    Messages:
    897
    Since I have my tub off I began to think about strapping my frame. Does one need to strap both the top and bottom or can just the top be done. Also what size flat stock is the best to use?
     
    Project71-5, Apr 22, 2005
    #1
  2. Apr 22, 2005
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    I've seen it done for race Jeeps. They strap the entire length top and bottom with 1/8" stock just narrower than the frame rail. Then it's stitched to the frame; 2" of weld, 4" of no weld, something like that.

    Actually I'd think along the bottom would do the most good - that's the rail in tension. That's also what Jeep did on the CJ-6.
     
    timgr, Apr 22, 2005
    #2
  3. Apr 22, 2005
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    What Timgr said. Nickmil.
     
    nickmil, Apr 22, 2005
    #3
New Posts