1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Bumper Lights

Discussion in 'Jeepster Commando and Commando Tech' started by Jbleeds, Jun 18, 2018.

  1. Jun 18, 2018
    Jbleeds

    Jbleeds New Member

    Lancaster, CA
    Joined:
    Dec 20, 2017
    Messages:
    22
    I’m trying to take the license plate lights off the bumper to get the bumper chromed. Can anyone tell me how to remove the lights from the bumper without cutting the wires? I don’t know if this makes a difference but this is the bumper for the continental kit.
     

    Attached Files:

  2. Jul 11, 2018
    commanlerwrangdo

    commanlerwrangdo Sponsor Sponsor

    Cleveland, Ohio
    Joined:
    Feb 10, 2014
    Messages:
    422
    On that style light you would have to follow the wire to where there is a connector and take it loose there. The lead is built into the socket.
     
  3. Jul 13, 2018
    timgr

    timgr Jeepin' Nerd Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    18,739
    My J20 has those type of lights, and I replaced them with LED equivalents. Very nice. It came from the factory with a connector in place for the bumper lights ... but it's a pickup truck. If this is a factory installed continental kit, I would expect to find a connector for the license plate light somewhere upstream in the Jeep.
     

Share This Page

New Posts