1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Another T/C question

Discussion in 'Early CJ5 and CJ6 Tech' started by SandhillMike, Dec 9, 2004.

  1. Dec 9, 2004
    SandhillMike

    SandhillMike Moderator

    Archer, Fla
    Joined:
    Oct 25, 2003
    Messages:
    246
    I'm going to have an OD on the D18 for my 66. Is it possible to mount a PTO also with the OD in place?
     
  2. Dec 9, 2004
    kamel

    kamel Senior Curmudgeon

    Erlanger, Kentucky
    Joined:
    Jun 10, 2003
    Messages:
    892
    Yes.

    You might be able to find a used one around, but you can get a new one from Herm the overdrive guy.

    He bought the rights and prints and tooling to make these things, so he is the only source for new.

    You basically take the rear housing off of the overdrive and bolt the adapter on to the rear of the overdrive.

    You'll have to modify PTO drive shaft lengths, but you probably figured that out already.

    good luck
     
  3. Dec 9, 2004
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    3,567
  4. Dec 9, 2004
    SandhillMike

    SandhillMike Moderator

    Archer, Fla
    Joined:
    Oct 25, 2003
    Messages:
    246
    Thanks Guys. Looks like it will be a little more than I want to spend for something that will be used rarely. :(
     
  5. Dec 9, 2004
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    11,508
    Keep your eyes open on Willystech, E-bay, etc. Sometimes the adapter and drive gear come up used for a lot less money. You might contact Herm and find out if he has any used set ups around. He sometimes does. Nickmil.
     

Share This Page

New Posts