1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

T 90 sealed bearing fix

Discussion in 'Early CJ5 and CJ6 Tech' started by Jon Roler, Apr 4, 2012.

  1. Apr 4, 2012
    Jon Roler

    Jon Roler New Member

    Joined:
    Feb 21, 2012
    Messages:
    6
    If I am replacing the input shaft main bearing with a sealed bearing do I have to plug the small hole in the input shaft which is under the snap ring? If I dribble oil into it it goes right into the transmission. I know I have to remove the inside seal, plug the oil return hole and seal the bearing to the case. Anyboby out there that has been down this road. Your ideas would be much appreciated
     
    Jon Roler, Apr 4, 2012
    #1
  2. Apr 6, 2012
    Dandy

    Dandy Member 2024 Sponsor

    Estherville IA
    Joined:
    Feb 10, 2008
    Messages:
    795
    Don't know Jon,maybe nickmil knows.....
     
    Dandy, Apr 6, 2012
    #2
  3. Apr 7, 2012
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    timgr, Apr 7, 2012
    #3
New Posts