1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Line Routing...

Discussion in 'Intermediate CJ-5/6/7/8' started by TexasBlues, Mar 9, 2012.

  1. Mar 9, 2012
    TexasBlues

    TexasBlues JEEP-Hockey-Holic

    Marietta, GA
    Joined:
    Jun 5, 2007
    Messages:
    529
    I have pre bent brake lines for a 76 frame... that will be used on a 75 frame...

    the 76 had standard drums (not power) all the way round...

    current set up is:

    75 frame

    85 W/T axles, disc front, drum rear

    will the lines i have work or should i just go and get new, bulk line... seems like some of the shapes are NOT working out....

    anyone have REAL pix of a brake/fuel re-plumb?

    when i got this frame, it was bare...

    prepare the forum for a ^%&king BOATLOAD of questions...

    TIA
     
    TexasBlues, Mar 9, 2012
    #1
  2. Mar 9, 2012
    bkd

    bkd Moderator Supreme Staff Member 2022 Sponsor

    K-Town Tenn.
    Joined:
    Apr 29, 2007
    Messages:
    3,294
    you'd have to rebend them to make em work I'd think.......get your self a double flare tool and a bender then have at it with bulk line........with a little practice you can get very good at it and have custom lines
    Jim
     
    bkd, Mar 9, 2012
    #2
  3. Mar 9, 2012
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,140
    Moved thread to Intermediate tech

    H.
     
    Howard Eisenhauer, Mar 9, 2012
    #3
  4. Mar 9, 2012
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Should be pretty close. The chassis is the same length, and the routing is basically the same. Put them up against your frame and check it out.
     
    timgr, Mar 9, 2012
    #4
  5. May 5, 2012
    danc9

    danc9 Member

    Clarksville, IN
    Joined:
    Apr 15, 2012
    Messages:
    84
    danc9, May 5, 2012
    #5
New Posts