1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Radiator Rubber Bushing

Discussion in 'Early CJ5 and CJ6 Tech' started by justnty, Dec 8, 2011.

  1. Dec 8, 2011
    justnty

    justnty Member

    Boise, ID
    Joined:
    Dec 9, 2009
    Messages:
    136
    Not sure what to call it but the big bushing at the bottom of the front grill with the huge bolt. Does anyone have any ideas where I can find one?
     
    justnty, Dec 8, 2011
    #1
  2. Dec 8, 2011
    n6ifp

    n6ifp Member

    San Bruno/...
    Joined:
    Sep 15, 2004
    Messages:
    206
    I just used a spare body bushing. It worked out to be the same thickness.
     
    n6ifp, Dec 8, 2011
    #2
  3. Dec 9, 2011
    jeepcj

    jeepcj Member

    cincy, Ohio
    Joined:
    Aug 23, 2009
    Messages:
    601
    I do believe that it is a body mount bushing. IIRC, I think there is ten body mount locations on a "5" and that is one of them.
     
    jeepcj, Dec 9, 2011
    #3
  4. Dec 9, 2011
    Stout

    Stout Member

    Quakertown, PA
    Joined:
    Nov 1, 2010
    Messages:
    958
    I used rubber body mounts (the doughnut type, not the flat 1/4" ones that were original on older Jeeps.) But I had to drill the center holes out larger to fit the metal bushing/sleeve that goes through the top and bottom radiator mounts.
     
    Stout, Dec 9, 2011
    #4
  5. Dec 9, 2011
    wsknettl

    wsknettl cuz

    NW Wisconsin
    Joined:
    Aug 24, 2003
    Messages:
    108
    wsknettl, Dec 9, 2011
    #5
New Posts