1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Delco Distributor Cap

Discussion in 'Intermediate CJ-5/6/7/8' started by OleBlue, Dec 6, 2011.

  1. Dec 6, 2011
    OleBlue

    OleBlue Sponsor

    Tennessee
    Joined:
    Feb 14, 2010
    Messages:
    1,001
    Is it normal for a delco distributor cap to be somewhat loose when mounted? In other words, is it normal to be able to rock it with your hand when the 2 L holders are properly positioned? If not, those springs in the L's may be worn out.
     
    OleBlue, Dec 6, 2011
    #1
  2. Dec 6, 2011
    pathkiller

    pathkiller Member

    Lorton, VA
    Joined:
    Apr 17, 2005
    Messages:
    878
    No, it should clamp down tight enough that it doesn't move.
     
    pathkiller, Dec 6, 2011
    #2
  3. Dec 6, 2011
    OleBlue

    OleBlue Sponsor

    Tennessee
    Joined:
    Feb 14, 2010
    Messages:
    1,001
    Thanks. That's what I figured, but wanted to be sure. I'm learning as I go.
     
    OleBlue, Dec 6, 2011
    #3
New Posts