1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Pintle Hook Mount.

Discussion in 'Early CJ5 and CJ6 Tech' started by 1960willyscj5, Nov 27, 2011.

  1. Nov 27, 2011
    1960willyscj5

    1960willyscj5 Well-Known Member

    Mesa, Arizona
    Joined:
    Nov 27, 2006
    Messages:
    2,793
    1960willyscj5, Nov 27, 2011
    #1
  2. Nov 27, 2011
    jeepcj

    jeepcj Member

    cincy, Ohio
    Joined:
    Aug 23, 2009
    Messages:
    601
    I dont know the answer to your question, but from looking at the part you posted, I would think it wouldn't be very hard to widen or narrow it to fit the frame rails.
     
    jeepcj, Nov 27, 2011
    #2
  3. Nov 27, 2011
    1960willyscj5

    1960willyscj5 Well-Known Member

    Mesa, Arizona
    Joined:
    Nov 27, 2006
    Messages:
    2,793
    I was thinking that also. Plus the stubs of the angles that are still under there will give good mounting points to the forward end of the install.
     
    1960willyscj5, Nov 27, 2011
    #3
  4. Nov 27, 2011
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,124
    They are different parts between a 3 & a 5 according to the parts manual (p/n 647418 vs. 807019), probably due to a 5 frame being a few inches longer.

    H.
     
    Howard Eisenhauer, Nov 27, 2011
    #4
New Posts