1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Anyone know....

Discussion in 'Early CJ5 and CJ6 Tech' started by kurtopia, Jul 17, 2011.

  1. Jul 17, 2011
    kurtopia

    kurtopia Member

    Colorado Springs, CO
    Joined:
    Aug 5, 2010
    Messages:
    56
    kurtopia, Jul 17, 2011
    #1
  2. Jul 17, 2011
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    A bona-fide plumbing supply should be able to help you. Hard to tell from the picture, but it looks like a 1/4" NPT to 3/8" NPT bushing?

    Or you could try to remove this one. I'd try to drill out the sender a little at a time, until I could collapse what's left of the sender and pull it out. I don't think there's any way to hold the bushing so you can remove it by turning the sender. The problem is holding the bushing without damaging the threads, in such a way that you can remove it from the holder when you're done.
     
    timgr, Jul 17, 2011
    #2
  3. Jul 17, 2011
    mikieboy

    mikieboy Member

    Jacksonville, FL
    Joined:
    Mar 21, 2005
    Messages:
    156
    mikieboy, Jul 17, 2011
    #3
New Posts