ID this part?

I need to find a replacement for the clutch master cylinder on my Jeepster, pictured below....





Its listed incorrectly as part number CM39179 here .


The actual part that you get when you ask for CM39179 (including all the interchanges I could find) looks like this.....



The one I have installed on the jeepster right now looks like the top picture, is aluminum, has a vertical mounting pattern with a stud in the top position, and "30127-AC USA" is cast into the bottom of the cylinder. I have been to Advance Auto Parts, Pep Boys, O'Reilly, NAPA, Carquest, Wester Auto, and Auto Zone. I contacted partsamerica.com by telephone who, in turn, referred me to R&B/Motormite, the owner of the photographs above. It's been two emails and two weeks with no response from R&B.



HEEEELLLPPP!!!! Tell me what this thing came off of. I don't want to do a 'swap' again! I just want to replace the defective part!!

 

would just drill new holes.

 

Looks alot like the MC I'm using on my clutch. It's a Wilwood http://www.wilwood.com
They can also be checked out at Summit Racing http://www.summitracing.com/ It's either part #WIL 260-6764 or WIL 260-1304

 

I am not a fan of drilling new holes at all......
Both wilwood and toyota can be expensive.....
If the toyo one was cheaper I would have to consider redrilling, especially if it meant easier to find replacements.....

 

napa has this one that is very similar.

1986 toyota 4runner 2.4 L 2366 CC L4 22REC

 

Looks like the top tab is offset to me. Not at 12 o'clock. I ID'd the MC I'm using and it's the WIL 260-1304. $45.90 from Summit

 

Thanks for all the responses. I haven't had time to check in since I posted (working). I did find the correct part finally. Thanks guys!

 

I saw this one on ebay and it's similar:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7936374335&category=33728