1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Cup Washer source.

Discussion in 'Intermediate CJ-5/6/7/8' started by pete72, Jun 2, 2011.

  1. Jun 2, 2011
    pete72

    pete72 Retro Aficionado

    Cumming, Georgia
    Joined:
    Feb 27, 2011
    Messages:
    158
    My exhaust noise/leak now appears to be a manifold leak so I will be investigating and probably replacing the manifold gaskets. The last time I did this I noticed that the cup gaskets or as Jeep calls them "clamps" were getting worn and distorted. They may be deforming and in any case I don't like the way they look so I want to replace them.

    Is there an alternative or better option to get improved clamping?

    I believe they are P/N 318-9219 and I can't seem to find a source. Anyone have a source or are they a junk yard pull?
     
    pete72, Jun 2, 2011
    #1
  2. Jun 2, 2011
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Try taking some off of a 4.0L at the junkyard. My 258 has a mix of originals and a handful of 4.0L ones that a junkyard employee gave me.
     
    timgr, Jun 2, 2011
    #2
  3. Jun 3, 2011
    DREDnot

    DREDnot Not new to JEEPS

    AZ
    Joined:
    Feb 7, 2010
    Messages:
    646
    Junk yard for sure.
    The factory ones are thick "cups", not washers by any stretch of the imagination.
    mine had a couple of doubled up washers in one spot and they had turned inside out
     
    DREDnot, Jun 3, 2011
    #3
New Posts