1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

PS pump question

Discussion in 'Intermediate CJ-5/6/7/8' started by rcassettyjr, May 9, 2011.

  1. May 9, 2011
    rcassettyjr

    rcassettyjr Member

    Shallotte NC
    Joined:
    Feb 14, 2010
    Messages:
    193
    I am buying a 75 CJ6 with a 232 that has power steering. I am going to drop my 74 304 into the 75 frame. My 304 does not have power steering. I know I will need the V8 brackets but will the pump and lines from the 232 work in the V8 brackets or do I need to get a pump and lines from a V8?

    Thanks

    Bob
     
    rcassettyjr, May 9, 2011
    #1
  2. May 9, 2011
    nwedgar

    nwedgar Now with TBI!

    Newnan, Georgia
    Joined:
    Oct 26, 2005
    Messages:
    1,785
    I believe the pump is the same, but you'll likely need new lines (not 100% sure though). You can buy the pressure line at most part stores. The return line is bulk, also from your part store.
     
    nwedgar, May 9, 2011
    #2
  3. May 9, 2011
    bigjohn

    bigjohn Active Member

    Kelso Wa
    Joined:
    Mar 18, 2010
    Messages:
    1,083
    X2 on that. Your 232 should have the pump mounted on the passenger side unless it was done as a conversion. The 304 to the best of my knowledge is mounted on the drivers side. This means they have very different hoses. Good luck!
     
    bigjohn, May 9, 2011
    #3
  4. May 9, 2011
    rcassettyjr

    rcassettyjr Member

    Shallotte NC
    Joined:
    Feb 14, 2010
    Messages:
    193
    Ok so I just need hoses and brackets. Thanks
     
    rcassettyjr, May 9, 2011
    #4
New Posts