1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Draining gas tank

Discussion in 'Early CJ5 and CJ6 Tech' started by Chris Insull, May 1, 2011.

  1. May 1, 2011
    Chris Insull

    Chris Insull All roads lead me back to the beach... 2023 Sponsor 2022 Sponsor

    Chesapeake, VA.
    Joined:
    Sep 22, 2002
    Messages:
    805
    I'm thinking of draining my rear mounted gas tank to clean it out and replace the sending unit at the same time. Any input on the best/ easiest way to proceed?
     
    Chris Insull, May 1, 2011
    #1
  2. May 1, 2011
    Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    5,424
    remove 3" rubber hose between filler neck and tank - siphon gas in filler hole - floor jack with 10"X10" . worked for me . also skid plate bolts REAR I welded flat washers to bolt heads . ground off 1/2 of washer . no need for wrench on top anymore
     
    Twin2, May 1, 2011
    #2
  3. May 2, 2011
    supertrooper

    supertrooper Member

    moreno valley, ca
    Joined:
    Nov 12, 2007
    Messages:
    757
    siphon as much gas as you can then get a buddy to help. a good floor jack and big peice of plywood to lower and raise the tank and a friend to stablize it.
     
    supertrooper, May 2, 2011
    #3
New Posts