1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

DJ3A Tranny Mount

Discussion in 'Flat Fender Tech' started by Alex V., Mar 22, 2011.

  1. Alex V.

    Alex V. Member

    Is the trans./transfer case mount included in the kits from Quadratec, Kaiser-Willys, etc. the correct mount for a DJ3A transmission, also?

    Also, some of the engine mounts pictured don't look like the originals. They function the same, but are much more squared off and custom-made looking. Is this just the picture, or what?

    Thanks.
     
    Alex V., Mar 22, 2011
    #1
  2. Alex V.

    Alex V. Member

    Ooops, sorry about posting it in the wrong forum. :oops:
     
    Alex V., Mar 23, 2011
    #2
  3. Alex V.

    Alex V. Member

    Bump.
     
    Alex V., Apr 1, 2011
    #3
  4. 54cj3b

    54cj3b Member

    assuming its like the ones under my 3b the flat one for under transmission and donut under transfercase were sold separate
     
    54cj3b, Apr 2, 2011
    #4