1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Transfer case

Discussion in 'Early CJ5 and CJ6 Tech' started by vicrider2000, Feb 27, 2011.

  1. Feb 27, 2011
    vicrider2000

    vicrider2000 New Member

    Joined:
    Dec 25, 2010
    Messages:
    46
    It seem like the cross member is holding it up to high.Instead of the motor having a slight lean back it leans forward.I think the clutch link rod from the frame to the tc would be level but mine isnt or am i wrong

    [​IMG]

    [​IMG]
     
    vicrider2000, Feb 27, 2011
    #1
  2. Feb 27, 2011
    jasonjp62

    jasonjp62 Member

    Pennsboro WV.
    Joined:
    Aug 15, 2009
    Messages:
    799
    F heads set pretty level in the engine bay! I think your ok with the way it is.
     
    jasonjp62, Feb 27, 2011
    #2
  3. Feb 27, 2011
    vicrider2000

    vicrider2000 New Member

    Joined:
    Dec 25, 2010
    Messages:
    46
    this pick shows the angle better
    [​IMG]
     
    vicrider2000, Feb 27, 2011
    #3
  4. Feb 27, 2011
    jeep2003

    jeep2003 Well-Known Member

    Upstate NY
    Joined:
    May 30, 2006
    Messages:
    1,935
    depends on the jeep but many have shims between the crossmember and frame. Maby somebody took yours out for some reason ?
     
    jeep2003, Feb 27, 2011
    #4
  5. Feb 27, 2011
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,525
    jpflat2a, Feb 27, 2011
    #5
  6. Feb 28, 2011
    Philip-TX

    Philip-TX Member

    Flower Mound, Tx
    Joined:
    Jul 25, 2010
    Messages:
    156
    Also check the other end. Are the motor mounts too low?

    Just a thought.
     
    Philip-TX, Feb 28, 2011
    #6
New Posts