1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

T98 ?

Discussion in 'Flat Fender Tech' started by 86cj7, Feb 3, 2011.

  1. Feb 3, 2011
    86cj7

    86cj7 New Member

    Joined:
    Dec 15, 2009
    Messages:
    35
    I have been searching for a t98 for my L- head134 for a while but got to thinking. The t98 and the t18 share alot of the same parts can I get a t98 input shaft and bearing retainer for a 134 and put them in a 1978 cj7 t18/dana20. Then I have to figure out a bellhousing
    Posted via Mobile Device
     
    86cj7, Feb 3, 2011
    #1
  2. Feb 3, 2011
    oldtime

    oldtime oldtime

    St. Charles,...
    Joined:
    Aug 14, 2006
    Messages:
    3,504
    Valid question but.... Sorry, that's just not likely to ever happen.
    There are 2 main components needed to marry a T98 to the the 134 bellhousing.

    1) The Jeep T98 specific maindrive gear which is 15/16" diameter.
    2) The 15/16" thick, cast iron Jeep T98 adapter to the 134 bellhousing.

    And NO, normally you can not swap a T98 maindrive gear into a T-18.
     
    oldtime, Feb 3, 2011
    #2
New Posts