1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

225/231 starter question

Discussion in 'Early CJ5 and CJ6 Tech' started by itsmy49willys, Jan 15, 2011.

  1. Jan 15, 2011
    itsmy49willys

    itsmy49willys New Member

    San Bernardino, Ca.
    Joined:
    Jul 29, 2010
    Messages:
    39
    so I was assembling my 225 v6 today and I went to put the starter on which came off of my 231 and the bolts were too long, about 1/2 inch. Is the 231 starter different? Maybe I grabbed the wrong bolts but i am nearly positive they were the same bolts I took off of the blown 231 I had in the jeep originally.
     
    itsmy49willys, Jan 15, 2011
    #1
  2. Jan 15, 2011
    Warloch

    Warloch Did you say Flattie??? Staff Member

    Falcon, CO
    Joined:
    Mar 4, 2003
    Messages:
    5,471
    Same starter. Got both on a shelf and they are the same.
     
    Warloch, Jan 15, 2011
    #2
  3. Jan 15, 2011
    Pack Rat

    Pack Rat Old Timer

    I live in a...
    Joined:
    Apr 1, 2006
    Messages:
    1,512
    Check that no little critters, like mud daubers, built baby mud dauber incubators up in the threads :).
     
    Pack Rat, Jan 15, 2011
    #3
  4. Jan 15, 2011
    itsmy49willys

    itsmy49willys New Member

    San Bernardino, Ca.
    Joined:
    Jul 29, 2010
    Messages:
    39
    ok I figured it out. the block unthreaded portion of the bolt actually goes up int the block about a 3/8".when I hand threaded them in it felt super tight. if that makes any sense. thanks guys
     
    itsmy49willys, Jan 15, 2011
    #4
New Posts