power steering set up on 46 cj2a

Im wanting to put a power steering set-up on my sbc, manual tranny powered 46 cj2a. So what vehicle do I rape and pillage to get a column, linkage, pump, steering box? If it matters, Im using a d30 up front off a 78 cj7. Would I have to make my own brackets for the power steering pump? thanks guys.

 

I used a tilt column from a 85 Buick Skylark to put in my 48. There are nuts on the column that allow you to mount it to the stock mount on the dash with a formed piece of 1" flat stock. Also I got the U-joint at the base of it, which ends up right at the floor.

 

at first i thought the water bottle was defying gravity and sitting on the seat

 

I am using a block mounted Sweet pump-made a very compact installation that bolts to the left front "motor mount" boss-similar setup as these:

http://www.speedwaymotors.com/Remote-Reservoir-Power-Steering-Pumps-for-GM-and-T-Bird,2069.html

http://www.speedwaymotors.com/Power-Steering-Pump-Brackets-for-Short-Water-Pump,2068.html

Best pic I have of installed pump-sorry:



I used a Flaming River tilt column in the 3B

 

I like your radiator support, where did you get it, do you have more pics?

Thanks
Terry

 

I do not want to hijack curb's thread so will post a few pics in "builds"

 

here you go-all in one package

http://www.speedwaymotors.com/Power-Steering-Pump-Kits,2072.html

 

i got a column out of my sister-in-laws old mid 80,s camero. also took the steering shaft, pump and box. been working great for the last 8 years now. i did have to have a high pressure hose made and bought a borgenson universal joint to couple the column to the shaft.

 

Thanks Fellas for the input. It looks like there is variety of vehicles I can take from. Is there any vehicles I should avoid?