1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

225 aftermarket parts

Discussion in 'Early CJ5 and CJ6 Tech' started by trollins, Nov 9, 2010.

  1. Nov 9, 2010
    trollins

    trollins Member

    Joined:
    Oct 3, 2010
    Messages:
    138
    i pulled the intake off my jeep i think the jeep has 200k on the clock and i want to change the cam and lifters but i want a little bigger cam than stock but all the engine stores around here say there isnt any aftermarket cam is this true??? if not then where can i but a cam???
     
    trollins, Nov 9, 2010
    #1
  2. Nov 9, 2010
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    sparky, Nov 9, 2010
    #2
  3. Nov 9, 2010
    trollins

    trollins Member

    Joined:
    Oct 3, 2010
    Messages:
    138
    can i use the comp cam 252h with stock rockers and pushrods and lifters and springs
     
    trollins, Nov 9, 2010
    #3
  4. Nov 9, 2010
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    I wouldn't/didn't

    Never use old lifters on a new cam.

    Cheap insurance if nothing else.
     
    sparky, Nov 9, 2010
    #4
  5. Nov 9, 2010
    trollins

    trollins Member

    Joined:
    Oct 3, 2010
    Messages:
    138
    i meant with new lifters just with all other stock parts
     
    trollins, Nov 9, 2010
    #5
  6. Nov 9, 2010
    Warloch

    Warloch Did you say Flattie??? Staff Member

    Falcon, CO
    Joined:
    Mar 4, 2003
    Messages:
    5,474
    Yes - it will work in a stock spec drive train just fine. Gives real good low end grunt without losing too much top end.
     
    Last edited by a moderator: Nov 10, 2010
    Warloch, Nov 9, 2010
    #6
  7. Nov 10, 2010
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Oh, right.

    I just bought the whole kit from Comp Cams. YMMV
     
    sparky, Nov 10, 2010
    #7
New Posts