Paint and Trim Plates

Is there a source for these? I have a 65. I didn't know that the WILLYS was on there until I cleaned them off.
If I don't find some reasonable reproductions I plan to glue these to the inside of the glove box door. Any thoughts on what type of glue?

Thanks.

 

The paint and trim tag is supposed to go on the passenger side firewall, I recall. You're lucky to have it.

I would glue them back where they were with a little Pliobond or Goo.

 

They were coming off the firewall so I went ahead and removed them. I want to make sure and not lose them and that's why I am moving them inside.

 

It's yours so you can put it where you want. Mine has been in it's original place since 1966 until I removed it to paint. I then used 3M cement and put it right back where it belongs. Passenger side fire-wall, engine side and just above the battery. That's where knowledgeable people will look for it. Just trying to keep it fairly stock.

 

I'd recommend http://www.walthers.com/exec/productinfo/904-299

Available at your local hobby shop.