1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

oil canister placement

Discussion in 'Flat Fender Tech' started by pjgaudy, May 16, 2010.

  1. pjgaudy

    pjgaudy New Member

    Hello from pjgaudy
    I purchased a cj2a with a 4f-134 engine ,which I discoved were put in cj3b or cj5 jeeps.Any way the motor didn't have an oil cannister on it and i would like to put one on it .Could you tell or show me where the hoses go to hook this oil canister up.Thank you
     
    pjgaudy, May 16, 2010
    #1
  2. Patrick

    Patrick Super Moderator Staff Member

    I moved this to the tech section..

    Welcome to the group, and one of the F head guys will be a long to help, I'm sure..
     
    Patrick, May 16, 2010
    #2
  3. garage gnome

    garage gnome ECJ5 welder

    There is a port on the the timing chain cover that the hose on the bottom of the canister goes and there are four ports on the exhaust manifold side where the other hose hooks to. It goes to the port closest to the front of the engine. There should be a brass 90 there too.
     
    garage gnome, May 17, 2010
    #3
  4. SIDSCJ

    SIDSCJ Jeep addict

    SIDSCJ, May 17, 2010
    #4