1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Hub caps for front axle

Discussion in 'Early Jeep Restoration and Research' started by Ppilotmike, Oct 18, 2004.

  1. Oct 18, 2004
    Ppilotmike

    Ppilotmike old JEEPer

    Oscoda Mi
    Joined:
    Oct 24, 2003
    Messages:
    142
    Hi all Ive been busy and the Jeep has been parked but I'm back in Ca for the winter and would like to finish my wheel change project. I have a pair of hub caps for the back and now need to find something for the front. The problem is the locking hubs, they stick out to far for the stockers to work and I'm not willing to cut the centers out of them. I wonder if anyone has ever cut a set of baby moons out with any success? Any thoughts are welcome. I wonder what Jeep did back in the 70's to remedy this problem?
     
    Ppilotmike, Oct 18, 2004
    #1
  2. Oct 19, 2004
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,559
    look here: http://community.webshots.com/user/jpflat2a
    click on hubcaps
    remember, locking hubs weren't factory
    where you been? missed you at the Jeep show yesterday
    got any pics of what you are using?
    I might have something
     
    jpflat2a, Oct 19, 2004
    #2
  3. Oct 19, 2004
    Boyink

    Boyink Super Moderator Staff Member

    Tulsa, OK
    Joined:
    Sep 20, 2002
    Messages:
    6,247
    There were baby moons with holes in the center.

    I had at full set at one point - enough for the trailer and Jeep, but didn't like the way they looked.

    Dale Bruns has them on his Tux 6 now:

    [​IMG]
     
    Boyink, Oct 19, 2004
    #3
  4. Oct 19, 2004
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    That's not Dale or Dale's Jeep.

    His isn't a Tux...
     
    sparky, Oct 19, 2004
    #4
  5. Oct 19, 2004
    Boyink

    Boyink Super Moderator Staff Member

    Tulsa, OK
    Joined:
    Sep 20, 2002
    Messages:
    6,247
    Doh...brain saw one thing and hand clicked another.

    Now I can't recall whose 6 that is...

    Ya know...we switched to half-caf coffee and I think I can tell.. :rofl:
     
    Boyink, Oct 19, 2004
    #5
  6. Oct 19, 2004
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,559
    those look like moons with trim rings
    ppilotmike
    I have a new pair that the centers have been cut out of, and trim moulding applied around the openings
    I will post pics of what I have in the next day or two
     
    jpflat2a, Oct 19, 2004
    #6
  7. Oct 19, 2004
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,797
    Jim has a lot of stuff - send him a PM. I just bought a pair like you describe from him. Haven't arrived yet, but I already have one dinged-up one. The item for the 6-lug wheels is supposedly different from that for the 5-lug, and one won't fit the other. If you can find a full set of solid ones, you can cut the center out of the pair for the front. Seems a shame though - the hole on the factory cap has a nice rolled edge. I have enough RWB caps to do that, but I'd rather spend a little more and save the emotional stress. Might be the way to go with aftermarket caps though.
     
    timgr, Oct 19, 2004
    #7
  8. Oct 19, 2004
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,559
    here's a pic of the 2 going to Tim
    note the raised lip around the hub opening
    these are for 6 lug or FSJ wheels
    will post other pic later
    the others with the centers cut out do not have this lip
    would anything like those pictured work for you Mike?
     
    jpflat2a, Oct 19, 2004
    #8
  9. Oct 19, 2004
    Ppilotmike

    Ppilotmike old JEEPer

    Oscoda Mi
    Joined:
    Oct 24, 2003
    Messages:
    142
    Those would be perfect Jim ,let me know if you have a couple you would like to sell. Mike
     
    Ppilotmike, Oct 19, 2004
    #9
  10. Oct 20, 2004
    Kodiak12060

    Kodiak12060 Sponsor

    Beacon NY
    Joined:
    Sep 27, 2002
    Messages:
    465
    What about caps like these? I've seen theseon CJ5's also.
     
    Kodiak12060, Oct 20, 2004
    #10
  11. Oct 21, 2004
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,559
    Mike, here are pics of what I have
    the group of 4 have had the centers cut out, then trim moulding applied around the sharp circle edge
    the other pair are factory cut; they have a small crown or raised portion around the center lip; don't know if this pair will work with your wheels
    pm if interested
     
    jpflat2a, Oct 21, 2004
    #11
  12. Oct 21, 2004
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,559
    a couple more pics, but I doubt these are CJ
     
    jpflat2a, Oct 21, 2004
    #12
New Posts