1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

horn button assembly

Discussion in 'Early CJ5 and CJ6 Tech' started by rejeep, Apr 8, 2010.

  1. Apr 8, 2010
    rejeep

    rejeep Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Rochester, NY
    Joined:
    Nov 5, 2009
    Messages:
    1,691
    I know it may sound like a silly question..
    But i bought one of the all in one horn kits and im a bit stumped on how to install..

    it seems the hole in the brass dish that goes into the column tube is bigger than the outer flange on the contact plunger..

    if Im making no sense here is a picture..
    [​IMG]
     
    rejeep, Apr 8, 2010
    #1
  2. Apr 8, 2010
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    Yep. The outside of the center piece should be about the same diameter as the steering shaft itself. The steering wheel nut holds the contact ring (dish).
     
    Patrick, Apr 8, 2010
    #2
  3. Apr 9, 2010
    rejeep

    rejeep Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Rochester, NY
    Joined:
    Nov 5, 2009
    Messages:
    1,691
    kinda still not following..
    any pictures or install instructions.. mine came in a zip lock
     
    rejeep, Apr 9, 2010
    #3
New Posts