Alarm for your ECJ5?

Anybody ever put an alarm in your ECJ? Any ideas?

How bout mounting one of these up underneath the dash?

http://www.homedepot.com/h_d1/N-5yc...splay?langId=-1&storeId=10051&catalogId=10053



Ryobi Introduces the Tek4 Motion Sensing Alarm powered by the Tek4 4V Lithium-Ion battery technology. This tool offers a number of advanced features such as: Remote Control for on-the-go arming and disarming, Infrared Motion Detection for larger protection coverage, multiple mounting options for convenience and weather resistant for the tough conditions. This Motion Sensing Alarm from Tek4 innovation is the perfect tool for those who need protection for their tools or their unfinished jobsites. The Motion Sensing Alarm is backed by Ryobis 2 year warranty.

• 12 Days Continuous Scanning per charge
• Remote control to conveniently arm and disarm the alarm
• Broad coverage area: 30 feet with 110 degree fan angles
• Dust resistant, water resistant, and impact proof
• MFG Brand Name : Ryobi
• MFG Model # : RP4300
• MFG Part # : RP4300

 

mine lives in the garage as well
for outside, I activate Smith and Wesson

 

In my AMC CJ-5, I had a hd eyebolt that was mounted on the hood. When the hood was closed there was a slot for it. Reach in through the grill and add a lock. Install a lock out switch for power and/or ignition switch.
On the Kaiser CJ-5,there is installed a power switch. It has the turn off knob located in the drivers compartment. I have to make a bracket to mount the switch completely in the engine compartment. Also have a Bulldog alarm in the engine compartment. It is remote controlled and got a good price at look store(they where getting rid of old stock). Have hd locking cable around steering wheel and seat bracket. Of course will be putting in the eyebolt and lock system. That should slow them down.

Ed :tea:

 

I arm the alarm by bumping all 4 levers on the floor and throwing the battery disconnect under the dash. Heck half the time I can't figure out why it wont go.R)