hydro clutch pedal help

Since its looking like retaining my cable type linkage would be more hassle than its worth. Im looking to swap in a hydro unit. Anybody that has done the swap think these kits are a good idea?

For brakes I like this unit from summit.

http://www.summitracing.com/parts/CMB-14-0016/

for clutch i like this kit from summit.

http://www.summitracing.com/parts/CMB-14-0011/

and for the slave kit I like the novak buick retrofit kit.

 

I used the larger MC that's shown in the brake kit you are thinking about, for my clutch. I tried the smaller MC that's shown for the clutch but it didn't hold up all that well. I used their dual reservoir unit for my brakes. The one you are looking at from Summit is a single. That means if you develop a major leak in the system you have NO brakes. Just as bad as the original Jeep design. A dual MC splits the rear and front brakes so if you lose one you still have the other. Check out Wilwoods site. You can get the specs from them and still order from Summit if you want.