Jeepster died on me

Well I started all the body work today. All that went well. Filled holes in the roof where the PO decided to install the worlds worst roof rack. Anyway went to leave and Jeep would not start. I figured out my problem is the fuel pump. My real question is when towing the commando home in neutral going down the road in silence(well not really) the trans / transfer case is making a noise like something is not right(the noise is like something is still rotating) . In gear when running the noise is not there. I wonder if it is the throw out bearing??

 

I wonder if I need to check some fluids. I have only had this thing for about 3 weeks.

 

was the transfer case still in gear? because if the t-case is in gear, sh*t will still be turning in it even if the transmission is in neutral.

 

the transfer case is connected to the axles, so unless the transfer case is also in neutral, whenever the jeep moves, crap will be turning in the transfer case, regardless of what gear the transmission may or may not be in. or am i missing the point?

 

no worries R)

i see though how my first post might have been confusing. oh well... no blood no foul.

 

The noise goes away as soon as I start to let the clutch out.

 

is the rig moving in this example?

 

No I get no noise when it is moving. No noise if I am just sitting in the garage with the clutch out and in neutral. I get the noise if the clutch is in and the trans is in gear(but not every time either). Then as soon as I start to let the clutch out the noise stops.