1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Wiring Diagrams

Discussion in 'Early Jeep Restoration and Research' started by Jeepers634, Sep 27, 2004.

  1. Sep 27, 2004
    Jeepers634

    Jeepers634 New Member

    Michigan
    Joined:
    Aug 2, 2004
    Messages:
    5
    Help!! I need wiring diagrams for a 70 CJ-5 with a 225 Buick V6...a complete wiring diagram would be nice...you know...headlights to tail lights...I am kinda lost. Thanks so much!! If someone could email it to me, circusaminal@aol.com, it would be greatly appriciated!

    Thanks again,

    Jay
     
  2. Sep 28, 2004
    wheelie

    wheelie beeg dummy 2024 Sponsor 2023 Sponsor

    York, PA
    Joined:
    Mar 6, 2004
    Messages:
    4,607
    IIRC my old Chilton manual has several in the back.
     
  3. Sep 29, 2004
    72CJ5er

    72CJ5er Renegade Member

    Hampton, TN
    Joined:
    Mar 31, 2004
    Messages:
    158
    yeah but if its like my Chilton book, you cant read the type, I found that apparently they all use the same wiring schematic, only its reduced in size on my big Chilton book and the type is illegible. I found the Haynes book(although not good for much lol) has a better copy of this schematic. if it wasnt for copyright laws I would just copy and post it but we all know how hard that would come down on us pirates :rofl:
     
  4. Sep 29, 2004
    dauntless_powered

    dauntless_powered SUB COB 2024 Sponsor

    Groton, CT
    Joined:
    Nov 3, 2003
    Messages:
    1,000,081
    i have a set, but its a hard copy. i have all the wiring for the 134's and the 225's. i got them off ebay when i was wiring mine. ii dont have a scanner, but i could send you a copy or the originals if the copies dont come out, let me look for them and i will get back to you. i just moved so i will go through my boxes tonight
     
  5. Sep 29, 2004
    Jeepers634

    Jeepers634 New Member

    Michigan
    Joined:
    Aug 2, 2004
    Messages:
    5
    Thanks so much, I would really appriciate that. I am getting very irritated because just when I think I am going to get somewhere, I don't!! My chilton's diagram sucks, you can't tell which goes where. I got a link today, but it came out blurry, and I tried to scan it to see if I could enlarge it, and that didn't work either...I just got a bunch of new parts for it and I can't put them on!! It's in beautiful condition otherwise, just needs to be cleaned up in the wiring. I will post some pics this weekend so you guys can drool...hehe.
     
  6. Sep 29, 2004
    Boyink

    Boyink Super Moderator Staff Member

    Tulsa, OK
    Joined:
    Sep 20, 2002
    Messages:
    6,247
    Have you bought a copy of the factory service manual yet?

    Well worth it..and the wiring diagram is much bigger.
     
  7. Sep 29, 2004
    Jeepers634

    Jeepers634 New Member

    Michigan
    Joined:
    Aug 2, 2004
    Messages:
    5
    Where can I locate one? Just looking for one now.
     
  8. Sep 29, 2004
    Boyink

    Boyink Super Moderator Staff Member

    Tulsa, OK
    Joined:
    Sep 20, 2002
    Messages:
    6,247
  9. Sep 29, 2004
    Jeepers634

    Jeepers634 New Member

    Michigan
    Joined:
    Aug 2, 2004
    Messages:
    5
    Do you have that manual handy...do you know the ISBN?
     
  10. Sep 30, 2004
    termin8ed

    termin8ed I didn't do it Staff Member

    Mason, MI
    Joined:
    Dec 22, 2002
    Messages:
    4,472
    Got this off someone on the board. Hippo I think. I ran it thru some filters to try to sharpen the lines, lost some of the color, but it is a little more defined.

    Probably not as good as a manual though ;)
     
  11. Sep 30, 2004
    72CJ5er

    72CJ5er Renegade Member

    Hampton, TN
    Joined:
    Mar 31, 2004
    Messages:
    158
    Hey heres a thought, you know you can always make copies at your local library. I dont know about yours, but the local library here has factory manuals on most vehicles. whenever I get stuck, I go there, the wiring diagrams on those are very detailed and large so you can see everything. Best of all, its only a per page copy and you usually can get away with a buck or so and have all you need.

    Just a thought
     
  12. Sep 30, 2004
    Hippo393

    Hippo393 Jeepless

    Charlotte, NC
    Joined:
    Sep 22, 2002
    Messages:
    1,130
    Yeah Brian, that's the one. I tried to send him that very diagram via a link to my Imagestation account and it didn't work for some reason.

    Jay, I'll send you a color copy if you pm me your snail mail addy.
    -Alan
     
  13. Oct 2, 2004
    CT

    CT Member

    Joined:
    Apr 28, 2004
    Messages:
    238
    There is some great tech section on the CJ3B website:

    http://www.film.queensu.ca/CJ3B/Tech/WiringHarness.html



    They even have a write up on how I did a replaced my wiring harness one wire at a time. (I am not all that professional when it comes to restorations. But I am cheap :>)

    While you have a CJ5 The CJ3B is basically the same jeep with a different front clip.

    Regarding wiring your jeep, one area I would highly suggest is overdoing your ground. Ground from the negative side of your battery to the frame, body and motor! Do all three. And you’ll find your electrical system does much better. I would recommend using braided ground wire.

    I once had a 1953 M38A1 military Jeep. When I would start it, the choke cable would get hot. It finely hit me, it was getting the best ground from the choke cable (that was attached to the dash board.) I put a ground directly from the motor to the battery and it started much faster. And the choke cable never got hot again.
     
  14. Oct 2, 2004
    SouthWest 67-5

    SouthWest 67-5 What's on your mind?

    La Quinta, Ca
    Joined:
    Sep 24, 2002
    Messages:
    24
    I think that came from me, and I found it some where on the web. I sent it to Tim when he was rewiring Lulu. This has been requested so often maybe it can be stored here on the baord?
    Let me see if this pic will go through.
    [​IMG]
     
  15. Oct 21, 2004
    Jeepers634

    Jeepers634 New Member

    Michigan
    Joined:
    Aug 2, 2004
    Messages:
    5
    Thanks so much guys...everything has helped out so much! No I can get the lights to work. I'm working on putting new stuff in for blinkers, and windshield wipers right now...I have to get my wife to post some pics. Thanks again and I'm sure I'll be asking for help soon!

    Jay
     
  16. Oct 25, 2004
    kamel

    kamel Senior Curmudgeon

    Erlanger, Kentucky
    Joined:
    Jun 10, 2003
    Messages:
    891
    If you can get a wiring diagram from a '72 - '75 service manual it will give you colors and wire gauges and fuse values. The service manuals for 71 and earlier don't show anything except for where each wire goes.

    The two jeeps are electrically just about identical.
     
  17. Oct 25, 2004
    CT

    CT Member

    Joined:
    Apr 28, 2004
    Messages:
    238
    Regarding help on your wiring harness, there is some good information at this website: http://www.film.queensu.ca/CJ3B/Tech/WiringHarness.html these are jeeps that are about 10 years plus older than yours, but the basics will be the same.

    It also has a small write up of my cheap $ 50.00 rewire job. I have done 2 of them and still staying in that price range.

    Regards
    Cliff Todd
     
New Posts