1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

304 HEI converssion problems! HELP!!!

Discussion in 'Intermediate CJ-5/6/7/8' started by cet73, Oct 27, 2009.

  1. cet73

    cet73 New Member

    I bought a HEI ignition converssion in 4wheelparts.com and when I put it on and crank the engine start backfire out of the carb. I put the piston #1 in the TDC and the rotor pointing to piston #1as it was before and the firing order was good then I crank the eng. and turn the ign. and nothing.
    Pleace I need some help or I going crazy.

    1973 CJ5 Jeep
     
    cet73, Oct 27, 2009
    #1
  2. iagmc

    iagmc Member

    Sounds to me like you are 180* off.
    Pull plug on 1 put finger in hole, turn over when it blows finger out whole, tdc and there you go.
     
    iagmc, Oct 28, 2009
    #2
  3. Dummy

    Dummy I kick hippies

    Dummy, Oct 28, 2009
    #3