1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Filler Neck Rubber Body Gasket/Seal

Discussion in 'Intermediate CJ-5/6/7/8' started by MountainCleric, Oct 22, 2009.

  1. Oct 22, 2009
    MountainCleric

    MountainCleric Another Member

    Butte, MT
    Joined:
    Sep 25, 2009
    Messages:
    90
    I have a rear gas tank and my fill port is in the back. The gasket that holds/cushions it in the body hole is cracked beyond all measure and doesn't look like it is going to last a lot longer. Vintage Jeep has "Call" next to the part I'm assuming is the right piece [654758]... which concerns me a bit. Can't seem to locate it in 4wd.com's catalog.

    There are a lot of flanges for mounting the neck... but they are not true to the intermediate. All post '75.

    Dare I call or is there a place that would have these on-hand?
     
    MountainCleric, Oct 22, 2009
    #1
  2. Oct 22, 2009
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    Did you check Walcks, Krage, The Jeep Guy, Herm......?
     
    Patrick, Oct 22, 2009
    #2
  3. Oct 22, 2009
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    IIRC I bought one from Krage - haven't installed it yet.

    Jeep PN is 654758. Their catalog shows it. You can find lots of other sources using Google and the PN.
     
    timgr, Oct 22, 2009
    #3
  4. Oct 23, 2009
    MountainCleric

    MountainCleric Another Member

    Butte, MT
    Joined:
    Sep 25, 2009
    Messages:
    90
    What I need is to learn some of these standard tricks... I have yet to do searching by PN... so, I'll begin there. Thanks again for bailing out my half-learned attempt!
     
    MountainCleric, Oct 23, 2009
    #4
  5. Oct 23, 2009
    unclebill

    unclebill Banned

    a sun blasted...
    Joined:
    Feb 17, 2009
    Messages:
    2,358
    unclebill, Oct 23, 2009
    #5
  6. Oct 23, 2009
    MountainCleric

    MountainCleric Another Member

    Butte, MT
    Joined:
    Sep 25, 2009
    Messages:
    90
    Well, there you go. My price-list must be out of date... super! It's more internet surfing for me and less porcelain-throne research.
     
    MountainCleric, Oct 23, 2009
    #6
New Posts