1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

axle rebuild guide

Discussion in 'Flat Fender Tech' started by canuck2a, Sep 1, 2009.

  1. Sep 1, 2009
    canuck2a

    canuck2a New Member

    Joined:
    Mar 9, 2009
    Messages:
    47
    Anyone know if there is an axle rebuild guide, for a 70-71 flanged d44. Never brebuilt one before and am looking for a reference point, especially for torque specs and any other little things i may not think of. As the axle i have is in peices so i did not even see how it all comes apart. Thanks
     
    canuck2a, Sep 1, 2009
    #1
  2. Sep 1, 2009
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    You need a Factory Service Manual
     
    Patrick, Sep 1, 2009
    #2
  3. Sep 2, 2009
    canuck2a

    canuck2a New Member

    Joined:
    Mar 9, 2009
    Messages:
    47
    don't imagine a factory service manual is easy to find.
     
    canuck2a, Sep 2, 2009
    #3
  4. Sep 2, 2009
    panzer

    panzer Super Mod Staff Member

    Columbus, OH
    Joined:
    Dec 9, 2003
    Messages:
    1,245
    panzer, Sep 2, 2009
    #4
  5. Sep 2, 2009
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    timgr, Sep 2, 2009
    #5
  6. Sep 2, 2009
    CJ-X

    CJ-X Member

    Ohio
    Joined:
    Aug 6, 2006
    Messages:
    816
    No need for any special book. It is just a common Dana 44 axle. Any information you find that looks close and references a Dana 44 will work.
     
    CJ-X, Sep 2, 2009
    #6
New Posts