1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Data tag location on Dana 25

Discussion in 'Early Jeep Restoration and Research' started by haighfam, Feb 17, 2009.

  1. Feb 17, 2009
    haighfam

    haighfam Member

    Paradise, CA
    Joined:
    Feb 8, 2009
    Messages:
    368
    I took a Dana 25 apart 6 months ago and didn't take a detailed enough picture to remember where this goes. Data tag that says "Spicer Joint". From the baggie it came out of it should go on the knuckle. Am doing a restoration on a '57 CJ5. Trying to get as close to factory original as possible, so I'll be back with lots of questions.
    Jerry
     
    haighfam, Feb 17, 2009
    #1
  2. Feb 18, 2009
    EricM

    EricM Active Member

    Southern California
    Joined:
    Dec 19, 2007
    Messages:
    1,019
    I have those, they are screwed on plate that held the knuckle seals.
     
    EricM, Feb 18, 2009
    #2
  3. Feb 19, 2009
    Vanguard

    Vanguard Take Off! Staff Member

    Vista, CA USA
    Joined:
    Aug 30, 2006
    Messages:
    2,260
    Sounds about right. The distance between the holes will tell you for certain. It either fits on the seals, the spindle bolts or on the kingpin.
     
    Vanguard, Feb 19, 2009
    #3
  4. Feb 19, 2009
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Knuckle seals.
     
    sparky, Feb 19, 2009
    #4
  5. Feb 19, 2009
    jeep2003

    jeep2003 Well-Known Member

    Upstate NY
    Joined:
    May 30, 2006
    Messages:
    1,942
    Yup mine was on the top front of the passenger side. Cant remember if the driver side had one too
     
    jeep2003, Feb 19, 2009
    #5
New Posts