Morning Fab Project

Well i decided that i finally needed a dedicated welding/cutting table. So i decided to make one this morning, so i can continue on with making my BBQ Pit. I had a bunch of scrap laying around. I had a piece of 1/4 inch around 2x3 foot piece of plate steel. It may be a little thin, but it is fine for m, it is suppsoed to be a smaller table so i can still work in the garage. I had some Schedule 80 pipe i got from work, boy was that a pain to cut. So C channel and a piece of angle and i got a welding table. I am going to add some casters. I wanted a no frills table, and that is what i got






I think in the future i may add some square to to make a reciever so i can get the vise off the table and allow me to expand the table.

 

Nice Dan...how bout a set of lockable wheels?
Jim S.