1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

F134 fuel / vacuum pump

Discussion in 'Early Jeep Restoration and Research' started by sherlockh, Jan 10, 2009.

  1. Jan 10, 2009
    sherlockh

    sherlockh New Member

    Joined:
    Jan 11, 2007
    Messages:
    23
    Help! - I'm trying to rebuild the fuel / vacuum pump on my '65 cj5. Why? - because I'm trying to keep it as "original" as possible. Both fuel pump diaphragms are torn, but the rest of the internal valving is OK. What I need is a source for the 2 rod wipers / grommets / bellows seals that wipe stray oil from the diaphragm push rods. Does anyone know of a source for these items?
    Clyde Holmes
     
    sherlockh, Jan 10, 2009
    #1
  2. Jan 10, 2009
    kiowamtp

    kiowamtp Member

    DFW
    Joined:
    Dec 24, 2004
    Messages:
    618
    kiowamtp, Jan 10, 2009
    #2
  3. Jan 10, 2009
    kiowamtp

    kiowamtp Member

    DFW
    Joined:
    Dec 24, 2004
    Messages:
    618
    FYI their website was www.then-now.com

    It took me a second to find the new website, sorry :)
     
    kiowamtp, Jan 10, 2009
    #3
  4. Jan 19, 2009
    sherlockh

    sherlockh New Member

    Joined:
    Jan 11, 2007
    Messages:
    23
    Kevin-
    Thanks for the website info. It's just what I needed. I have Googled for this info several times with no success. I'll probably be contacting you later when I get it rebuilt for plumbing info on the vacuum side. Thanks again.
    Clyde Holmes
     
    sherlockh, Jan 19, 2009
    #4
New Posts