1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

ignition coil

Discussion in 'Early CJ5 and CJ6 Tech' started by rossbos, Jan 3, 2009.

  1. Jan 3, 2009
    rossbos

    rossbos Member

    everett wa.
    Joined:
    Nov 10, 2002
    Messages:
    230
    Does anyone have the proper delco-remy coil number to replace my coil. My parts book calls out for part #932 547 to replace the coil in a 68-71 CJ5 with a V6. That really doesn't tell me much, I would assume that it would have come with a delco-remy coil from the factory means how it's a buick GM engine.
     
    rossbos, Jan 3, 2009
    #1
  2. Jan 3, 2009
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Why do you need the Delco number? Ignition coils are a generic thing ... there are only two types that were used with points ignitins - either with an internal resistor, or not. You can look up the Standard Products number on their web site, and it will cross to any aftermarket coil manufacturer.

    Ok, the Standard number is UC-12 or UC-12X, a universal ignition coil for use with an external resistor.
     
    timgr, Jan 3, 2009
    #2
  3. Jan 3, 2009
    rossbos

    rossbos Member

    everett wa.
    Joined:
    Nov 10, 2002
    Messages:
    230
    My mistake I should have posted this on the restoration page. I was looking for a specific delco-remy number. I realize there is plenty of replacement stuff out there.
     
    rossbos, Jan 3, 2009
    #3
New Posts